Ask Latest Price
Active Member
5 Years
Guangzhou Anlai Airtech Co.,Ltd
Add to Cart
ISO Standard Dust Free Room Clean Room Hard Wall ISO 7 Panel Clean Room Booth
ISO 7 is one of the most common classes of cleanrooms. The cleanroom classification standard ISO 14644-1 requires specific particle count measurements and calculations to classify the cleanliness level of a cleanroom or clean area. For ISO 7, particles smaller than 0.5 microns are not taken into consideration. Total Clean Air is the leading expert in the design and fabrication of critical environment applications. We offer a complete range of equipment, furnishing and supplies for ISO 7 cleanrooms.
Some Considerations when going for an ISO 7 cleanroom:
High Efficiency Penetration Air (HEPA) Filtration is 99.99% efficient at 0.3 micron and should be considered when looking to achieve ISO class 7.
Softwall and Hardwall cleanroom constructions are both effective at achieving the environment required for ISO class 7.
If organisations are working towards GMP grades, monobloc is the most effective solution, as it can accommodate required features such as interlocked doors and coved floors.
ISO Clаѕѕ 7 cleanrooms ѕhоuld also have a Changing Atrium for gowning which is set apart from the main working area. This reduces contaminants from entering the clean area.
What is a Moulding Cleanroom?
A moulding Cleanroom is used specifically to produce the different types of plastics components that are required to manufacture products. It operates in line with the same principles of any other Cleanroom by eliminating the possibility of contamination and minimising particles in the air – the process is very efficient and specialised. (It is for this similar reason also that many industries such as the medical field, now use antimicrobial plastics in their products)
The medical, pharmaceutical, aerospace, military, and biotech industries often need a cleanroom to manufacture some of their parts through moulding.
These parts could be anything from medical devices to plastic bags to surgical equipment. Many of the most innovative products require precision manufacturing and robust processes.
What is an ISO Class 7 Cleanroom?
An ISO Class 7 cleanroom is a type of cleanroom that is meticulously designed to prevent contamination from happening inside the facility. Typically a Class 7 Certified Cleanroom can be used for injection moulding and final assembly of critical parts for the medical device or electronics industries.
Why use ISO Class 7 Cleanroom?
The ISO Class 7 Cleanroom facilitates the needs of many different types of clients manufacturing requirements as it maintains extremely low levels of particulate matter such as dust and airborne organisms – quantified by 10,000 particles per cubic meter. The Class 7 environment is tested to ISO 14644-1 and the HEPA (High Efficiency Penetration Air) filtration rate is over 99% efficient.
Key Plastics is certified to ISO 13485- Medical Devices